How to flash PULSE 4K mini with USB
How to flash PULSE 4K mini with USB
What you need before we start:
1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).
2) Image of your choice.
3) Compression software such as 7zip, Winrar, Winzip
1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.
Images for PULSE 4k mini
Flashing the Receiver.
Firmware installation procedure
Step 1 – Download software for a specific receiver to your computer
Step 2 – Unzip the .zip file on your PC after downloading. 3 files will be created:
“force_pulse4k.txt”, “Citaj_PULSe_4K !!!. Txt” and file “openatv-6.4-pulse4k-backup-XXX_copy_to_usb_root.zip”.
Step 3 – Copy the file “force_pulse4k.txt” and the file “openatv-6.4-pulse4k-backup-XXX_copy_to_usb_root.zip” directly to the root on a USB key.
Step 4 – Follow the instructions in the video above
The flashing process should take approximately two five minutes to complete, while the receiver
is being flashed it is vitally important that you DO NOT power the receiver down for any reason as
this can cause serious and or permanent damage.
.jpg)
Comments